Hi all,
I'm using a fortigate unit with Ipv4, IP are manually entered in every-one's computer.
I have two interfaces, (1) with 10.18.x.x IP and (2) with 172.25.1.x IP. Im suspecting an IP conflict occured on the 172.21.1.x range but when I go to the Fortigate administration panel, User & Device > Device > Device Definition, no devices connected to the interface (2) are shown, when there are at least three servers.
Where can I find information about the devices connected to my interface (2) (or actually every interfaces) ?
I access the administration panel with a computer connected to interface (1), I don't know if it's relevant.
Thanks,
Solved! Go to Solution.
In System > Network > Interfaces, enable "Device detection" in each interface you want to monitor.
In System > Network > Interfaces, enable "Device detection" in each interface you want to monitor.
Also:
get system arp
may help
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.