Hello everyone!
Is there someway to attach a 'link-monitor' to a specific static route??
The feature "set update-static-route enable" just remove ALL the routes rellated to an interface.
I was looking for something like Cisco track, that you can attach to any static route.
Thanks in advance.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
In essence it is the same as the Cisco track feature. In either way you are monitoring a destination server.
In essence it is the same as the Cisco track feature. In either way you are monitoring a destination server.
Yes and not, I guess.
Yes, it can monitor a destination IP... (with "link-monitor" on Fortigate, or "IP SLA" on Cisco)
But with Cisco it could attach the "sla/track" individually on each route, but with Fortigate it just remove ALL the routes related to that interface.
This is a problem cause Fortigate is acting as MPLS concentrator in my topology. I need to clear only the routes that are not answering to the "link-monitor" not all routes on that MPLS.
Did you ever get an answer to this as I need to do the same thing, remove a single static rather than all statics associated with an interface?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1517 | |
1013 | |
749 | |
443 | |
209 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.