Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Shantilal1998
New Contributor III

Link monitor issue

Hi guys,

 

We have configured port5 in HA as path monitoring. There is a failover happened & checked that link monitor is showing dead in secondary firewall which was primary before failover.

 

The Server IP is reachable but link monitor is not coming up. Kindly suggest.

1 REPLY 1
distillednetwork
Contributor III

Do you have link monitor setup with

config system link-monitor

on an interface that is not dedicated for management? If so you can only use link-monitor on the primary unit because in HA a shared interface does not have an active IP when it’s the passive unit. 

Labels
Top Kudoed Authors