Hi
I want to setup Link-monitor on my VPN tunnel.
can't understand what to config at the Gateway IP.
it is a site to site (FG to FG Tunnel).
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Regularly the gateway IP is the tunnel interface IP on the other end, while the destination IP can be anything behind it.
toshiesumi wrote:I understand, actually when i setup IPsec to AWS it works fine because the interface was setup with IPRegularly the gateway IP is the tunnel interface IP on the other end, while the destination IP can be anything behind it.
when i setup site to site VPN the interface has no IP
IP is 0.0.0.0
Remote IP to 0.0.0.0
You should set interface IPs on both ends of the tunnel if both sides are interface mode/route-base IPSec. Otherwise you can't use features like link-monitor since the default route must be routing to the outside of the tunnel.
toshiesumi wrote:I can set any ip I would like?You should set interface IPs on both ends of the tunnel if both sides are interface mode/route-base IPSec. Otherwise you can't use features like link-monitor since the default route must be routing to the outside of the tunnel.
for Example
FG A IPsec Interface
IP 169.254.50.150
Remote IP 169.254.40.150
FG B IPsec Interface
IP 169.254.40.150
Remote IP 169.254.50.150
It should work although I never used link-local addresses. Don't forget to put subnet mask 255.255.255.255 on the local IP. From 5.6, remote-ip also requires subnet mask.
toshiesumi wrote:HiIt should work although I never used link-local addresses. Don't forget to put subnet mask 255.255.255.255 on the local IP. From 5.6, remote-ip also requires subnet mask.
I setup everything Just the way i setup AWS Tunnels
with the Local and remote Its (AWS also use subnet 169.254.X.X for the link monitor)
but can't gate any indication of the Tunnel Status on Link Monitor (I know the tunnels are UP and traffic working correctly)
here is what i get on Link Monitor (compared to AWS Tunnels)
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1731 | |
1105 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.