Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
michael_lacey
New Contributor

Layer 2 MPLS between 2 Fortigates

Hi All,

 

Probably a silly question, I have 2 Fortigates at different sites. We have just been provisioned with an MPLS circuit, turns out its a layer 2 ethernet. I assumed I could just IP an interface at each end on the fortigates and they could ping each other?

Though I cant get this to work. am I missing something?

 

Thanks

4 REPLIES 4
rwpatterson
Valued Contributor III

Welcome to the forums.

 

If it is truly layer 2, then it would be like a big old virtual switch and that should be all you need to do. If I was in your shoes, I would get together with your ISP to make sure that they configured it correctly. I have seen a high rate of initial configuration failures with these types of circuits. You would think the ISPs have their stuff together at this point in time, but that is not always the case.

Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com

Bob - self proclaimed posting junkie!See my Fortigate related scripts at: http://fortigate.camerabob.com
michael_lacey

Thanks, always good to get a sanity check :)

Maik
New Contributor II

in case you have a cluster on each side, make sure to use differet cluster ids. they are used to calculate the virtual mac
lujo48
New Contributor

Hello,

You were able to make the connection. I have the same problem and no communication.

Thanks in advance.

Labels
Top Kudoed Authors