Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Jad
New Contributor

Lan to Lan Port forwarding

 

Hi,

I would like to apply a PAT from "Network A" to "Network B" for all the traffic destined on port 444 to be mapped to port 555.

Is there a chance for doing this using VIPs ?

So for example, all traffic to destination 1.2.3.0/24 on port 444 will be mapped to 1.2.3.0/24 on port 555, so only the port will be mapped not the src/dst networks ?

Thanks for your ideas

 
1 REPLY 1
Sachin_Alex_Cherian_

Hi Jad,

 

I hope the below link answers your query.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-set-port-translation-port-forwardin...

If the nat type is static, we cannot use the same external and mapped IP on Fortigate.

As explained in the link you may check by changing the nat type to load-balance and check.

Regards,

Regards,
Sachin.
Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors