Lan to Lan Port forwarding

[Jad]

Hi,I would like to apply a PAT from "Network A" to "Network B" for all the traffic destined on port 444 to be mapped to port 555.Is there a chance for doing this using VIPs ?So for example, all traffic to destination 1.2.3.0/24 on port 444 will be mapped to 1.2.3.0/24 on port 555, so only the port will be mapped not the src/dst networks ?Thanks for your ideas  

[Sachin_Alex_Cherian_]

Hi Jad,

I hope the below link answers your query.

https://community.fortinet.com/t5/FortiGate/Technical-Tip-How-to-set-port-translation-port-forwardin...

If the nat type is static, we cannot use the same external and mapped IP on Fortigate.

As explained in the link you may check by changing the nat type to load-balance and check.

Regards,