good day engineers.
i have a fortigate 900D that i configured an interface 12.X.X.1 i want to direct traffic through this port to the internet(0.0.0.0), LAN and WAN. i have configured on a client machine(test machine) the default gateway to point to the fortigate interface. this has given me positive results in connecting to 0.0.0.0 through forti gateway. however a new problem has started which i'm failing to understand.
1) i can ping, tracert and telnet to all WAN and LAN resources, meaning all my layer 3 is correct if i capture packets i can see traffic from user computer with syn and ack from target resources, for example a content server and a printer
the strange part is i cannot run the application to open the content server which i access on port 80 through a browser. but i can telnet to the same content server on port 80 and connection established.
i cannot print despite the fact that i can ping the print server.
i have a rule that allows traffic to the Lan and one for the WAN. i allowed ALL services for test purposes and will lock down once i i can get a working set up.
may i please know where or what i need to configure to pass this hurdle. i am kind of desperate and time is not favouring me so i will be grateful for any speedy response.
Kind regards
Forti guy
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.