I've come across an odd issue with some devices not getting link on some of the LAN switch ports on the FGT-60F. One device is a single board computer that only links at 100Mbps FDX, it wont get link on some of the ports but does come up on LAN4/Internal4, I had to try a few before it would light up.
We were recently provided a new cable modem from our ISP and periodically it loses WAN link (LED off) about once a week-2weeks. Cables swapped with fresh patches and the issue still comes up once in a while.
Posting here to see if anyone else has had some issues with copper links on these entry models. I typically work with 100-200 series units but use this 60F at home for learning/lab, and have a couple 80F units deployed at remote offices.