Does anyone know if LACP is supported on the 61e?
The doc shows "Link Aggregation Control Protocol (LACP) is now supported on FortiGate and FortiWiFi 90E, 80E, 60E, 50E, and 30E devices."
Not sure why it's limited to these model numbers and not the "odd numbered" units.
I can't find the option available in a 61e after a firmware update.
Does anyone have any insight?
Go to Solution.
LACP support for 31E-9xE is planned for FortiOS v6.2.2, it's not supported in the current v6.2.1.
View solution in original post
Yep, the question is about the "x1x" models with internal SSD. Those will be supported in a later version.
You can do that on FG60E with 6.2.1... I just tried it:
config system interface
set vdom "root"
set type aggregate
set member "internal6" "internal7"
set device-identification enable
set lldp-transmission enable
set snmp-index 16
After that, I have this interface normally in GUI. (I don't know if this option was in GUI before I did that in CLI, I didn't check it)
anyone know if will be soon extended the LACP aggregation to the new models 60f/61f
Good news: LACP on x1 desktop models is now supported in FOS v6.2.3 (see https://forum.fortinet.com/tm.aspx?m=181463&mpage=2).
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2023 Fortinet, Inc. All Rights Reserved.