L3 Interfaces on fortiswitch

[cquiroz2]

Hello Team, 

I am configuring a new switch and I need to configure some interfaces as L3. This would a standalone switch so no fortilink whatsoever. 

I know in cisco all I need to do is " No switchport"  on switch for it to work as a L3. However, I am not seeing that on Fortiswitch. Is there a way to do this? I have tried reading the docummentation but this is not clear for me. Thanks in advance! 

Fortiswitch version is 7.2.4

[AEK]

Hello

L3 requires "Advanced Features License" and is not supported on 1xx models.
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/2340e644-1cdd-11ee-8e6d-fa163e...

For L3 configuration you may start here:

https://docs.fortinet.com/document/fortiswitch/7.2.4/administration-guide/774771/config

Hope it helps.

[Toshi_Esumi]

Even with Cisco switches nowadays the L3/routing feature support is separated by models. For example, Catalyst 1200 doesn't support while Catalyst 1300 does support.

Toshi