Hello,
I have a 60F with 2 WAN configured in a SDWAN:
- Connection1 is a public IP over a private IP with VLAN
- Connection2 is a public IP
When the primary connection in the SDWAN is Connection1, i have to set this command to be able to join Fortiguard servers:
Config sys fortiguard
set source-ip Connention1_IP Public
end
If the Connection1 failed and the SDWAN change the primary interface to connection2 i can no longer join FortiGuard servers and the users are blocked by Web Filter.
Best Regards,
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello,
FortiGuard interface selection method is controlled by the command below:
config system fortiguard
set interface-select-method
auto Set outgoing interface automatically.
sdwan Set outgoing interface by SD-WAN or policy routing rules.
specify Set outgoing interface manually.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1643 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.