Issue with 802.11g client

[Peter-Wainwright]

I've got a wireless issue where an 802.11g client cannot connect to a radio configured for 802.11n/g/b.

If I configure the radio band to "802.11g" or "802.11g-only" then the client can connect.

This has been the case since FortiOS 7.2.1, and I am still seeing this behaviour in FortiOS 7.2.4.

The issue was described in a previous post.

https://community.fortinet.com/t5/Support-Forum/Wireless-issue-Deny-assoc-request-ht-rate-set-mismat...

Any ideas?

Pete

[Anthony_E]

Hello Peter,

Thank you for using the Community Forum. I will seek to get you an answer or help. We will reply to this thread with an update as soon as possible.

Thanks,

[Anthony_E]

Hello Peter,

We are still looking for someone to help you.

We will come back to you ASAP.

[srajeswaran]

Hi Pete,

The issue described in previous post has been fixed from 7.2.2 and you may be hitting a different issue. Can you share the AP debug logs from your device for the current issue.