Hi,
I configured a new VPN S2S on my fortigate with a remote Cisco ASA.
The issue is that i can't initaite the vpn from the Fortigate location. and When i launch the connection from the the ASA location the vpn is up and ready.. but still can't have connectivity from Fortigate location to ASA one.
All seem ok on my fortigate.
Routing of encrypted networks via the tunnel.
ACLs opened on both side (outgoing and incoming)
I have this error on my fortigate (INVALID ID Information)
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
I could not see your png file but maybe nothing wrong and the cisco is set as a "initiator" only
e.g
crypto map asa2fgt 10 set connection-type originate-only
PCNSE
NSE
StrongSwan
THanks Emnoc,
This was caused by having multiple subnets on phase 2
http://kb.fortinet.com/kb/documentLink.do?externalID=10440
Thanks.
Sometimes you can have this error because you need to define a local ID on the Fortigate:
2019-02-12 18:43:59.920894 ike 0:VPN_XXX:343423: received peer identifier FQDN 'x.x.x.x'
2019-02-12 18:43:59.920957 ike 0:VPN_XXX:343423: PSK authentication succeeded
2019-02-12 18:43:59.920979 ike 0:VPN_XXX:343423: authentication OK
.
.
.
2019-02-12 18:44:09.327511 ike 0:VPN_XXX:343423: notify msg received: INVALID-ID-INFORMATION
config vpn ipsec phase1-interface
edit "VPN_XXXX"
set localid "x.x.x.x"
set localid-type fqdn
next
end
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.