Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Nelvin
New Contributor

Issue: SSLVPN Connected But Can't Access to Internal Server

Hi everyone,

I connected forticlient-SSLVPN and get the connection.

But the problem is I unable access to my internal server.

Configuration for Fortigate 100E as attached :

 

 

 

 

 

 

Should I add remote groups for the internal server?

 

 

 

Does anyone got solutions for me to try? thanks in advance =)

 

4 REPLIES 4
Toshi_Esumi
SuperUser
SuperUser

Is it "split-tunnel" or "no split". If split, check your PC's routing table w/ "route print" to see if server IP/subnet is there. The destinations have nothing to do with remote groups. It's decided by 1) routing (in case split) and 2) policy for ssl.root->internal interface.

Nelvin

Hi Toshi Esumi,

 

Thanks for your suggestion.

I didn't enable the split-tunnel function.

And I checked and opened all the services in IPv4 policy, ssl.root --> Internal LAN.

 

Finally, I found out the issue.

My company network IP range is 192.168.1.X, internal server 192.168.1.254.

Branch site router IP range also 192.168.1.X.

Both network conflicted. 

 

 

lotfi_boucherit
New Contributor

I'm having same problem with an IPsec VPN.

It is connected, but no traffic is working.

Toshi_Esumi

This thread was for SSL VPN. Open a new case with a proper subject including a word "IPSec" and share the proper info about topology and config. Otherwise, nobody can't comment on with just "not working".

Announcements

Select Forum Responses to become Knowledge Articles!

Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.

Labels
Top Kudoed Authors