Is it possible to increase the FG-120G virtual domain range?

[Shahariar2112]

The FG-120G datasheet shows that its virtual domain has a default of 10 and a maximum of 10. It is possible to increase the virtual domain from 10 to higher?

[Atul_S]

The max supported VDOM is 10 for this model and hence this cannot be increased even if you consider applying an additional VDOM license. As a litmus test, the absence of the below command under "config system global" indicates that the device does not support expanding the VDOM license capacity.

# execute upd-vd-license <license key>

I hope this answers your query. 

Thanks

[Shahariar2112]

I don't have an FG-120G device. How can I know that this device supports or does not support expending virtual domains?

[Toshi_Esumi]

General design rule with FTNT products so far at least 'D' - 'G' series, is anything below FG-1000x is limited to 10 VDOMs. If you need to have ability expanding the number of VDOMs beyond that, it has to be 1000E/F/G(? may not exist) or above model.

Toshi

[abarushka]

Hello,

Unfortunately it is not possible to increase the maximum limit of virtual domains above 10 (FortiGate 120G). The command "execute upd-vd-license" is not supported by FortiGate 120G hardware platform either.

[Atul_S]

The best document to refer to is the device datasheet for the specific model. For example, 120G support for the virtual domain is as below:

default/max=10/10

Whereas as per data sheet for 2000E device is as below:

default/max=10/500  //this means that one can request/apply for additional VDOM support extension.

I hope this helps.

Thanks