Is it possible to assign a zone to the ssl.root interface?

Weatherlights · ‎03-30-2018

I am new to Fortigate and started using FortiOS 5.6.3.

I finally setup SSL-VPN and I am able to assign the ssl.root interface to firewall policies and they work quiet fine. However I wounder if it is possible to assign the interface to a zone. It somehow does not appear in the zone assignment screen.

I allready made sure that the interface is not used in any policy but without any luck. So I would be happy if someone can just confirm that it should work... any hint what I may do wrong might be helpfull aswell.

Best regards and thank you in advance.

Markus · ‎04-04-2018

Nope, at present (FOS 5.6.3) this is not possible, also tried in CLI. BR,

Markus

________________________________________________________
--- NSE 4 ---
________________________________________________________

FortiBoris_FTNT · ‎02-21-2019

A KB article explains this: https://kb.fortinet.com/kb/documentLink.do?externalID=FD38065

Kind regards,

boris

Is it possible to assign a zone to the ssl.root interface?

Nominate a Forum Post for Knowledge Article Creation