Invalidate PPPoE interface on WAN2.7

[Vikas]

Hi All,

PpoE works fine on Cisco router but doesn't work on Fortigate 60 F, getting below error.

update_interfaces()-423: Update PPPoE interfaces
update_interfaces()-427: Invalidate PPPoE interface wan2
update_interfaces()-427: Invalidate PPPoE interface wan2.7
update_interfaces()-481: Found PPPoE interface wan2
update_interfaces()-563: PPPoE parameters of wan2 unchanged.
update_interfaces()-481: Found PPPoE interface wan2.7
update_interfaces()-563: PPPoE parameters of wan2.7 unchanged.
pppoe_read_intf_link_sock()-406: interface=internal1 event=1

[bcsk]

It seems like there might be an issue with PPPoE configuration on the Fortigate 60F, possibly related to interface settings or credentials. Double-check the configuration to ensure accuracy and try troubleshooting the PPPoE setup.

[Tomdanny]

Observe these steps to invalidate a PPPoE interface on WAN2.7:

1. Access the web interface of your router or other network equipment.
2. Go to the section for WAN2.7 configuration.
3. Search the PPPoE settings for a "Disconnect" or "Invalidate" option.
4. To end the PPPoE connection on WAN2.7, select this option.
5. When prompted, affirm the activity.

The PPPoE interface can be invalidated to cut off the connection and unplug it from the internet. If you want to troubleshoot or modify the settings on your network's WAN2.7 interface, you might need to do this.

[Saad112233]

Moreover, your commitment to staying updated with the latest advancements in the AI space is commendable. It's evident that you strive to be a reliable resource for businesses.. isthereaiforthat