I have a Fortinet 100D firewall with two Internet connections connected to the firewall with the following port setup. Port 16 is the fiber connection to fiber provider at 1GB. On Wan1 I have a 100MB cable modem connection. In my static route settings I have the following.
Fiber = 0.0.0.0/0.0.0.0 Default Gateway X.X.X.X Admin Distance = 1 and Priority = 0
Cable = 0.0.0.0/0.0.0.0 Default Gateway X.X.X.X Admin Distance = 1 and Priority = 10
Randomly we loose internet connection incoming and outgoing for approximately 10-20 seconds and it just starts to go again. If I have a continuous ping to 8.8.8.8 when this happens I get a request time out a couple of times and then reply from 172.16.XX.XX (Internal IP of Firewall) Destination unreachable a couple of times and then request times out and then back with pings.
Pinging the outside IP addresses of the firewall and some server from a different location and Internet provider when we loose internet I get request times out on the other end. I also have a ping going to the backup cable modem link and I don't loose a ping at all while the fiber connection goes up and down.
I believe this might be a firewall problem because I have a laptop with an outside IP address from the internet provider and have a continuous ping going to 8.8.8.8 and it never drops a ping when we loose the internet connection.
I have already replaced the cables from the Internet connection to the firewall and from the firewall to the switch and still the same problem.
To get VIP's working on the fiber was had to set gratuitous arp on the VIP to make them work with the fiber connection, but not on the cable connection.
It seems all of this started when we added the fail-over link.
Any help in this matter would be appreciated.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
What version of code are you running?
How are you doing the circuits? Strictly failover? WLLB? Are you grouping them in a similar zone to reduce policies etc?
Thanks!
Mike Pruett
I know this isn't your answer, but I would definitely raise the distances above 1, because if you add a vpn, there is no lower distance to route traffic with.
Bob - self proclaimed posting junkie!
See my Fortigate related scripts at: http://fortigate.camerabob.com
Currently I am running 5.4.4 build 1117 GA Regarding policies for each Internet connection I have separate polices in place. I really don't need WLLB the cable line is strictly for fail-over and I am not using no zones.
I did make a change to my fiber connection default route and changed the priority from 0 to a 1 and kept the administrator distance as 1.
Thanks,
Richard
Currently I am running 5.4.4 build 1117 GA
Regarding policies for each Internet connection I have separate polices in place.
I did make a change to my fiber connection default route and changed the priority to a 1 and kept the administrator distance as 1.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1688 | |
1087 | |
752 | |
446 | |
227 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.