Internal fault route with LLB WAN rule

[soportesistemas]

Hi there,

I have configured a model 60D Fortigate V5.4.0 with "wan-load-balance" (WAN1 and WAN2). In default mode most of the traffic goes out the WAN2, but I need some users always go for WAN1, so I have set a rule in "LLB WAN rule" for the user I need to leave for WAN2, but when active this rule, the internal traffic to the subnet X does not work (no ping, no http or ssh). Anyone know where I would be the problem?

PD: I have configured a rule that connects my "internal" to the subnet X and another rule that connects the subnet X to my "internal".

[soportesistemas]

I have finally solved the problem.

I created several rules "Wan LLB Rules" for all traffic on port 80 and 443 go directly from the WAN I am indicating and requests that I do through the port 22 I do them directly to an "address" I created with the public IP of my destiny, so the internal connections through port 22, run smoothly.

I leave what I set if anyone serves or has the same problem.

Thank you.