Internal VIPs, for VPN

[Tipdrill]

Hi everyone, I should make sure that a server accesses 2 vpn. The serve is not found in the LANs authorized to access the vpn, so I should create an internal VIP. Is it possible to do 2 vips on only 1 ip and make sure that the vpn is present with the ip nat?

Thanks

[Toshi_Esumi]

It's not VIP(DNAT) but SNAT to change the source IP:192.168.1.10 to either 192.168.3.x or 192.168.2.x based on destinations. Just set those two policies based on the two desinations(VPNs) and set up NAT(SNAT) with either interface IPs or ippools.

[talzub]

You need to set NAT according to the IP protocols of the VPN. This is basic and easy I am sure you can maneuver through it.

[Tipdrill]

Thank you all. It was what I missed!  Hello

[Farfella]

Hi. How to make a root on Open VPN please ?

Yes just founded [link]https://www.iamvpn.com/cyberghost-test/[/link]