Guys,
I need some insights from forum.
Don't know if you have done this setup up before, i attached the diagram of small network.
Normal traffic, VLAN10 go to link1, VLAN20 go to link20..all ok can go to internet. i did some PBR routing in the
L3 switch to pass to traffic to corresponding link. Gateway of VLAN is the SVI created in switch.
But one Requirement is to fail over the VLAN10 subnet to VLAN20 when the link 1 is down.
i can force the routing in switch to set the next hop of VLAN10 to be the link 2 when link 1 is down, but traffic is not passing through Firewall, it cant go to internet.
Any idea?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1749 | |
1114 | |
765 | |
447 | |
241 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.