Current fortinet 61F firmeware version 7.0.11 for wireless using FAP U323EV to 7.0.132 version, I have configured 2x ssid guest for tunnel and another one for brdige mode most of them works during the night time and next day morning it stopped broadcast the SSID.
also found out some forward traffic logs where it showing FORTI-AP interface is not able to talk to DNS whil
Solved! Go to Solution.
Thank you for your feedback, glad I could help.
approx 5 hours ago ssid stop broadcasting, I have rebooted AP but still not able to see either of SSID broadcast again.
Based on the event logs it looks like the SSID status is set to Down by an administrator.
I never made any config over ssid down, it's seems to done it self or its not been reach out to Internet.
I don't think that the AP that is not able to reach the DNS server is a valid reason to disable the SSID. You can check if there is a FMG or a scheduler that have changed the status of the SSIDs:
What is the current status of the SSID, are those enabled now?
Yes its available under SSID config section.
Hello,
I have found out below screenshot showing always but for some reason it only allow night time 22:00 to 08:00 next day morning. so now it's working on current firmware version fine.
Thanks for your support.
Thank you for your feedback, glad I could help.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1737 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.