Does anyone know what this means arrow in the interface/port 2 (See figure attached)?
Elthon Abreu FCNSA v5
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Yes, I am sure.
Please check your interface status on FGT like:
#get hardware nic mgmt2 ..... Link up Speed 100 Mbps Duplex half
elthon.abreu wrote:To knowledge from all, there is a bug with the Fortgiate 600C which causes problems in auto-negotiation of the interface speed.
For what it's worth, our company manages some 60-80 remote sites in rural areas (mostly sat or terrestrial fiber connections) with about 40-50 fgt devices deployed in about half of those sites -- we found auto-negotiation doesn't works even 80% of the time with the sat/radio/switch (mostly 2960s) equipment we are connecting the fgts too. The general rule of thumb we have been following is to ether force the duplex/speed on both sides of the WAN connection or just set one side to auto-negotiation and force the other side.
NSE4/FMG-VM64/FortiAnalyzer-VM/6.0 (FWF30E/FW92D/FGT200D/FGT101E/FGT81E)/ FAP220B/221C
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1696 | |
1091 | |
752 | |
446 | |
228 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.