Hello,
Has anyone had any luck with integrating Meru Wireless APs with a FortiGate 60e?
It seems when I try to create a managed AP I cannot since it's requiring a 16 character serial number and the Meru Wireless APs are 15 characters...
I believe Meru Wireless APs can be converted into FortiAPs?
Any assistance would be appreciated :)
Thanks
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Which model APs are you using? The older Meru APs can't be managed by the FortiGate, only the Meru/WLC controller.
The newer FAPU (for universal) APs can be configured by either the Meru/WLC controller or the FortiGate.
One of my FAP-U's has the serial no. PU321E5E18010000 (OK, some digits changed...). But, it's a FAP-U!
I read that on boot they will search for a WLC first, then for a FGT. They need to reboot for this as they change their firmware image.
Hey,
What firmware are you running on your FortiGate? I believe support for the FAP-U 321 was only added in version 6.0.2. I've checked on my Gate which is running 6.0.3 and the 321 profile is on there.
These Meru APs cannot be managed by a FGT. Tried to find a place in the docs to prove it but haven't found any.
AP332i models are the older Meru ones, they aren't the same as FAPUs so they can't be managed by the FortiGate.
Which model APs are you using? The older Meru APs can't be managed by the FortiGate, only the Meru/WLC controller.
The newer FAPU (for universal) APs can be configured by either the Meru/WLC controller or the FortiGate.
The model is an AP332i Dual Radio access point. Is it not possible to integrate these APs with the FortiGate 60e Wifi Controller?
One of my FAP-U's has the serial no. PU321E5E18010000 (OK, some digits changed...). But, it's a FAP-U!
I read that on boot they will search for a WLC first, then for a FGT. They need to reboot for this as they change their firmware image.
Hey,
What firmware are you running on your FortiGate? I believe support for the FAP-U 321 was only added in version 6.0.2. I've checked on my Gate which is running 6.0.3 and the 321 profile is on there.
I was on 6.0.1 but I've just updated to 6.0.3 and I can see a FortiAP profile named "FAPU321EV" but nothing labeled "332i"
I also still cannot type in the 15 characters serial number within the "Managed FortiAPs" section it requires 16 characters.
These Meru APs cannot be managed by a FGT. Tried to find a place in the docs to prove it but haven't found any.
AP332i models are the older Meru ones, they aren't the same as FAPUs so they can't be managed by the FortiGate.
Thanks for everyone's input on this query. It's very much appreciated! Thanks for clarifying.
Hiya. Did you get anywhere with this? I am also trying to do this...
Kind Regards.
Ken.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.