- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Inspection mode
Hi,
Firewall is in flow mode .
If I change the antivirus inspection mode to proxy mode what is pros and cons
Thanks
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
You mean I just switch from flow to proxy ? YES Sorry . I did not get the above part . When we do feature switch from Proxy to flow how come the policy ends up with no utm profiles. If you decide to switch back to flow, you have also to update all policies with proxy profiles (e.g. AV) back to flow profiles. The policy will not loose all UTM, only the proxy based profiles, as they are "incompatible" in flow mode.
________________________________________________________
--- NSE 4 ---
________________________________________________________
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi, Not at all, from flow to proxy, you can use profiles in flow or proxy mode. In flow mode, you can only use flow profiles. If you are in proxy mode and have, let's say you have a AV proxy mode profile in a policy, and want to switch back to flow, this policy will loose the AV profile assigned and you have to "manual" select a AV flow profile again. Hope this clarifies it better :)
________________________________________________________
--- NSE 4 ---
________________________________________________________
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Exactly... and from 6.4, the proxy/flow mode is selected per policy, yes (you can mix proxy and flow policies)
________________________________________________________
--- NSE 4 ---
________________________________________________________
- « Previous
-
- 1
- 2
- Next »
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi,
it clarifies everything required .
Just to conclude everything ,
Before 6.4 We have to switch the FW to proxy mode . After switching we can use profiles in flow or proxy mode.
and want to switch back to flow, this policy will loose the AV profile assigned and you have to "manual" select a AV flow profile
From 6.4 We don't need to switch to PROXY mode . Just change the flow mode to in the profile and assign the profile in the policy
Please confirm
Appreciate your help and patience
Thanks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Exactly... and from 6.4, the proxy/flow mode is selected per policy, yes (you can mix proxy and flow policies)
________________________________________________________
--- NSE 4 ---
________________________________________________________
- « Previous
-
- 1
- 2
- Next »