Hello all, yesterday I could still see the category Industrial under Application Control, today the item has disappeared. The license is active and I have also restarted the machines. Does anyone have an idea what else I can do?
forti (global) # get
fail-open : disable
database : extended
traffic-submit : enable
anomaly-mode : continuous
session-limit-mode : heuristic
socket-size : 64 (MB)
engine-count : 0
sync-session-ttl : enable
np-accel-mode : basic
cp-accel-mode : advanced
deep-app-insp-timeout: 86400
deep-app-insp-db-limit: 100000
exclude-signatures : none
packet-log-queue-depth: 128
ngfw-max-scan-range : 4096
tls-active-probe:
interface-select-method: auto
Greatings
Oops I see that your output says none excluded.
Try to enable visibility from CLI:
My_61F # config ips global
My_61F (global) # show config ips global set database extended set traffic-submit enable set exclude-signatures none end
My_61F (global) # set exclude-signatures ? none No signatures excluded. industrial Exclude industrial signatures. My_61F (global) # set exclude-signatures none
---
Opinions expressed are my own and may not represent the official opinion of my employer.
Yes I was searching first, then I found the hint with the exclude none. The point was then also in the menu to see, 1 day later it is no longer displayed no matter what I do.
Model/version? You might open a ticket with support ... this sounds odd. I just did it on my 61F and it worked right away.
---
Opinions expressed are my own and may not represent the official opinion of my employer.
User | Count |
---|---|
1921 | |
1144 | |
769 | |
447 | |
277 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.