In FortiOS 7.2.12 M, when using packet capture, the source/destination ports and protocol are displa

[Catkin038]

Model:FGT-61E
OS:v7.2.12.M-build1761

[funkylicious]

your view is kinda bugged, ngl.

have you tried with a different browser ?

[Catkin038]

Of course, I've tried Edge/Chrome/Firefox, and the situation is the same across all of them.
All browsers are running the latest version.

[AEK]

Is it the same when you try from CLI with "diag sniffer ...".

[Catkin038]

No, the CLI and the saved packet capture files are normal, and they open properly in Wireshark.

[Toshi_Esumi]

I see the same on my lab 60E w/ 7.2.12, while my 40F w/ 7.4.8 doesn't have this problem. Likely a known bug but open a ticket with TAC to confirm.

Toshi

[Catkin038]

Thanks for the information. I have decided to temporarily roll back to version 7.2.11. Since I’m using it in a HomeLab, I don’t have the option to submit a TAC request. Is there any other way to let Fortinet know that there is an issue with this firmware?