- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Import address objects in FortiManager
Hi
We have a few FortiGate appliances managed by 1 FortiManager. i need to create a large number of IP subnet objects, which will be shared by more than 1 of the FortiGate appliances. Is there a way to import objects?
I know on a Fortigate itself, I could cut/paste the commands in the CLI. So, is there a way of doing this in the FortiManager cli?
Many thanks
Roy
Solved! Go to Solution.
- Labels:
-
FortiManager
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi RSM
You can use Scripts to quickly add your objects.
https://docs.fortinet.com/document/fortimanager/7.4.4/administration-guide/990788
And then you can run it on FMD DB so the objects are created on FMD DB.
Then once you use any of the objects in a firewall rule and push it to a FG, the object will be pushed automatically to the FG.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hi RSM
You can use Scripts to quickly add your objects.
https://docs.fortinet.com/document/fortimanager/7.4.4/administration-guide/990788
And then you can run it on FMD DB so the objects are created on FMD DB.
Then once you use any of the objects in a firewall rule and push it to a FG, the object will be pushed automatically to the FG.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Perfect, thanks. That is exactly what I was looking for.
