I have noticed if you set an IP-Range for the client configuration. It will then give the client the first IP-Address that is useable, and then set the Gateway to the second IP-Address of the range. Can you set the gateway manually?
Solved! Go to Solution.
Hello @MG4 ,
According to my research, there is no option for changing the gateway address. Why do you need to that change?
Also if you want you can review this document about how to work the gateway address on a dial-up vpn.
Hello @MG4 ,
According to my research, there is no option for changing the gateway address. Why do you need to that change?
Also if you want you can review this document about how to work the gateway address on a dial-up vpn.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1741 | |
1109 | |
755 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.