got configured IPSec tunnel it is up (phase 1 and 2) but no Outgoing Data.
Policy from Zone (with vlan10 in it) to VPN tunnel configured, Static Route (with subnet I try to reach, and VPN interface configured) also.
When Ping from computer with vlan10 I see deny and hit policy 0 in FAZ.
What is the best practice to check why traffic is not hitting this tunnel or policy?
P.S I have access only to my side of tunnel.
P.S II. Is is possible that when my part of the tunnel is configured ok, policy and route also but on the other side of the tunnel something is missing tunnel will show up on 2 phases but will send no data to the tunnel?
What's bother me is that there is O B in Outgoing data.
FGT OS. 6.4.6