IPSec between FG40E and teltonika RUTX14 - traffic through fortigate

[TomKoz]

Hello, I have an ipsec tunnel running between teltonika rutx14 and fortigate. The devices see each other, ping each other, but how do I make all the traffic from rutx14 go through fortigate? Site to site tunnel. Teltonika is a dialup user because I don’t have a static ip

[AEK]

Hello Tom

On RUTX14 set full tunnel in phase 1, and its phase 2 selector should have 0.0.0.0/0 as remote net, while on FG the phase 2 selector should have 0.0.0.0/0 as local net.

Also on FG you should configure a firewall rule to allow required traffic all from IPsec tunnel to WAN.