IPSec VPN for Site to Site connection via dialup interface to Cisco Router

[wedda]

Hi All

I have problem with IPSec VPN for Site to Site connection via dialup interface.

Central Site (CS) LAN  CS Internet WAN –

Phase1-PSK Dialup to Remote1 – Phase2 CS LAN + Remote1 LAN

Phase1- PSK Dialup to Remote2 – Phase2 CS LAN + Remote2 LAN

Peer ID and PSK set in user group

UserGroup1 Remote1Users contains UserID of Remote1 and Password PSK1

UserGroup2 Remote2Users contains UserID of Remote2 and Password PSK2

-------------------------

Remote 1 – 10.10.1.1LAN 1.1.1.1 WAN Local ID Remote1

-----------------------

Remote 2 – 10.11.1.1LAN 2.2.2.2 WAN Local ID Remote2

------------------------

The problem I see is when Remote2 calls in. The Fortinet is showing it as Remote1 and failing phase1.

When only a single VPN is configured that VPN works fine.

Any idea’s anyone?

[still_hidden]

Hi there, are you using main or agressive mode?