Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
Esh
New Contributor

IPSec VPN Split Tunnel and Local Lan Access

We have IPSec VPN setup using FortiClient. We have split tunneling enabled so that web traffic goes out via the local network.

 

Is there a way to disable local lan access in the above scenario?

1 REPLY 1
AlexC-FTNT
Staff
Staff

No, not really. The access is controlled from FortiClient - you either use split-DNS, or route all the traffic through the VPN connection. You can add in split DNS the local subnet to match the network of your client (that you want to disable). This way the traffic will flow through the VPN, but reach nowhere (hopefully the subnet in your fortigate does not match the local subnets of your client, and that your client doesn't simply reconfigure the local network with a new IP range).


- Toss a 'Like' to your fixxer, oh Valley of Plenty! and chose the solution, too00oo -
Labels
Top Kudoed Authors