IPSec Dial Up VPN Issue

[yogee95]

1)I created IPSec Dial up VPN 2)Via Dial up Client it shows Connected but not able to Access any DATA 3)I have messed sumthing to do with Addresses 4)I have Created DHCP Server on INTERNAL Interface Require your Help Guyzzz

[emnoc]

fwiw: The diag debug flow diagnostics, is your best friend Have you validate the following; dialupvpn range has proper fwpolicies correct static routes performed any diag debug flow and captures ?

[yogee95]

Hi Thanks for your Help, but actually i was looking for steps for Setting d Dial up connection if you could help me with the DHCP server and addressing setting not with IP Address but what need to be there for Dial Up

[ede_pfau]

a) before you try to make DHCP over IPsec run, use static addresses in your client for testing b) get the FortiOS Handbook with an excellent chapter on IPsec VPNs, examples for dial-in scenario and configurations.