Hello everybody,
we are currently using a Fortigate and ForticlientOnlyVPN with an IPSEC XAUTH configuration.
Since we are now moving to Forticlient EMS (up to date server and client) and after testing Forticlient 7.4.0.1658 the following problem occurs:
If I manually add the IPSEC connection we are using with the OnlyVPN to the new Client (managed with EMS), succesful connection is possible.
If I config the same IPSEC parameters on EMS and distribute it, remote access does not work.
The error message on the client states something with Error: Aggressive Mode and the log files hints a certificate error (I replaced some sensitive information):
21.08.2024 08:12:21 error ipsecvpn date=2024-08-21 time=08:12:20 logver=1 id=96567 type=securityevent subtype=ipsecvpn eventtype=error level=error uid=664559DDC9CC478DBC0D3A5B686BAA87 devid=FCT8002127206410 hostname=PC pcdomain=domain deviceip=IP devicemac=MAC site=default fctver=7.4.0.1658 fgtserial=N/A emsserial=FCTEMS8824006969 os="Microsoft Windows 11 Professional Edition, 64-bit (build 22631)" user=USER msg="loc_ip=locIP loc_port=500 rem_ip=remIP rem_port=500 out_if=0 vpn_tunnel=Tunnel status=negotiate_error init=local mode=xauth_clinet stage=1 dir=inbound status=failureInitiator: parsed remIP aggressive mode message #1 (ERROR)" vpntunnel=Tunnel
21.08.2024 08:12:21 info ipsecvpn date=2024-08-21 time=08:12:20 logver=1 id=96577 type=securityevent subtype=ipsecvpn eventtype=error level=info uid=664559DDC9CC478DBC0D3A5B686BAA87 devid=FCT8002127206410 hostname=PC pcdomain=Domain deviceip=IP devicemac=MAC site=default fctver=7.4.0.1658 fgtserial=N/A emsserial=FCTEMS8824006969 os="Microsoft Windows 11 Professional Edition, 64-bit (build 22631)" user=User msg="IKE phase1 authentication fail as peer's certificate is not verified" vpntunnel=Tunnel locip=locIP locport=500 remip=remIP remport=500
I also tried to "blindly" import the XML of the manually configured IPSEC into EMS which also does not work.
Any ideas where the problem can reside? I already opened a ticket but no luck so far.
Kind regards,
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello @danger ,
- For the XAUTH, are you using group in the phase1 settings or you are using "inherit from the policy"? Also make sure you are using one DH group and then try just for testing.
I am using phase1 and not "inherit from policy". Only one DH group is chosen and is in both settings the same.
When I faced this, it turned out to be a mismatch between the EMS server's certificate and what the client was expecting. Double-check your certificate settings and ensure they're correctly distributed to all clients.
Could you specify on this since there are multiple certificates in play. SSL cert is a digicert one therefore trust is there. The EMS signed client certificate is distributed to the Client. Do you mean the default cert which the EMS generates? When the forticlient was installed I vaguely remember accepting a certificate warning.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1547 | |
1030 | |
749 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.