Hi Team,
I'm trying to Create an IPSEC Site to Site to a Sophos UTM.
Below was my configuration in FortiGate:
Just wanna to confirm that my configure correct or not as default.
Solved! Go to Solution.
Hi Team,
I have tried the method follow the link https://medium.com/@ICTFella/how-to-configure-ipsec-vpn-between-fortinet-and-sophos-firewall-ict-fel...
It works perfectly.
Thank you very much everyone.
Hello,
It is hard to define which configuration is correct or wrong.
In case the tunnel doesn't come up you may consider to collect ike debug traces by running the commands below:
diagnose debug application ike -1
diagnose debug enable
Hi,
It is challenging to determine which arrangement is right or incorrect.
If the tunnel doesn't appear, you might want to try collecting ike debug traces using the tools listed below:
check for debugging in the application, such as -1 check for debugging
Hi @CloudTechZero ,
Without configurations from the remote peer, we can't say whether the configurations on FGT are correct or not.
1) You have to match the settings in phase1 and phase2 between FortiGate 80F and Sophos UTM9
2) If all settings are matched, but tunnel is not up, please make sure that the FGT is the responder and run the IKE debug on FGT.
Hi Team,
I have tried the method follow the link https://medium.com/@ICTFella/how-to-configure-ipsec-vpn-between-fortinet-and-sophos-firewall-ict-fel...
It works perfectly.
Thank you very much everyone.
User | Count |
---|---|
2538 | |
1351 | |
795 | |
642 | |
455 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.