Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
CloudTechZero
New Contributor II

IPSEC Site to Site From FortiGate 80F to Sophos UTM9

Hi Team,

I'm trying to Create an IPSEC Site to Site to a Sophos UTM.

Below was my configuration in FortiGate:

pastedimage1737119159273v5.png-1280x960.pngpastedimage1737119135328v4.png-1280x960.pngpastedimage1737119080386v3.png-1280x960.pngpastedimage1737119048515v2.png-1280x960.pngpastedimage1737119002671v1.png-1280x960.png
 

Just wanna to confirm that my configure correct or not as default.

 

FortiGate  

 

1 Solution
CloudTechZero
New Contributor II

Hi Team,

 

I have tried the method follow the link https://medium.com/@ICTFella/how-to-configure-ipsec-vpn-between-fortinet-and-sophos-firewall-ict-fel... 

It works perfectly.
Thank you very much everyone.

View solution in original post

4 REPLIES 4
abarushka
Staff
Staff

Hello,

 

It is hard to define which configuration is correct or wrong.

 

In case the tunnel doesn't come up you may consider to collect ike debug traces by running the commands below:

 

diagnose debug application ike -1
diagnose debug enable

 

 

FortiGate
jack533
New Contributor II

Hi,

 

It is challenging to determine which arrangement is right or incorrect.

 

If the tunnel doesn't appear, you might want to try collecting ike debug traces using the tools listed below:

 

check for debugging in the application, such as -1 check for debugging

dingjerry_FTNT

Hi @CloudTechZero ,

 

Without configurations from the remote peer, we can't say whether the configurations on FGT are correct or not.

 

1) You have to match the settings in phase1 and phase2 between FortiGate 80F and Sophos UTM9

2) If all settings are matched, but tunnel is not up, please make sure that the FGT is the responder and run the IKE debug on FGT.

Regards,

Jerry
CloudTechZero
New Contributor II

Hi Team,

 

I have tried the method follow the link https://medium.com/@ICTFella/how-to-configure-ipsec-vpn-between-fortinet-and-sophos-firewall-ict-fel... 

It works perfectly.
Thank you very much everyone.

Announcements
Check out our Community Chatter Blog! Click here to get involved
Labels
Top Kudoed Authors