Support Forum
The Forums are a place to find answers on a range of Fortinet products from peers and product experts.
corymrussell
New Contributor

IPS alert white list?

IPS is sending copious amounts of alerts for HP.SiteScope.Remote.Code.Execution. I'm curious to know if there is a way to exclude these alerts. We have determined this to be a false report generated from a program required one these handful of machines.

 

Any help would be greatly appreciated.

1 Solution
ede_pfau
Esteemed Contributor III

In your IPS sensor, there is one part for filters and one for overrides. If you put a specific signature into the overrides section and set the action to "monitor" then this signature will not be re-evaluated in the filter. In your case, you could "exempt" the signature from blocking.


Ede

"Kernel panic: Aiee, killing interrupt handler!"

View solution in original post

Ede"Kernel panic: Aiee, killing interrupt handler!"
2 REPLIES 2
ede_pfau
Esteemed Contributor III

In your IPS sensor, there is one part for filters and one for overrides. If you put a specific signature into the overrides section and set the action to "monitor" then this signature will not be re-evaluated in the filter. In your case, you could "exempt" the signature from blocking.


Ede

"Kernel panic: Aiee, killing interrupt handler!"
Ede"Kernel panic: Aiee, killing interrupt handler!"
corymrussell

Thanks. I must have overlooked adding the filter 60 times.

Labels
Top Kudoed Authors