IP VIRTUAL NOT APPEARING IN MAKING TIME POLITICS

[JonathanFurtado]

After updating the Fortigate 60D to the 5.4 version and configure the balancing links , the moment will add a door release policy. When I go to destination does not appear the virtual IP set to release the door , so I can not perform the creation of the policy. Does anyone have any idea what can be ?

[kallbrandt]

Are you using google translate? I find it very hard to understand what you are talking about.

If you are referring to wan-link-loadbalancing, it will create a virtual interface that you need to choose as the destination interface.

[JonathanFurtado]

First thanks for the return. Yes , I'm using . I will try to explain again using the translator and I will send in Portuguese if you can use the translator there had been easier . Summing up: I FortiGate 60D , was upgraded to FortiOS 5.4, this set the balancing links and works perfectly . But I have to release the door of my service terminal and for this I create a Virtual IP and then create a policy for release of the port and server IP . But not this showing up in time to create the political , Virtual IP does not appear . So I can not create a policy to release the doors servers for external access .

em português:

Primeiramente obrigado pelo retorno. Sim, estou usando. Vou tentar explicar novamente usando o tradutor e vou mandar em portugues se puder usar o tradutor ai ficara mais facil.

Resumindo:

Tenho fortigate 60D, foi atualizado para o FortiOS 5.4, esta configurado o balanceamento de links e funciona perfeitamente.

Porém tenho que liberar a porta do meu terminal service e para isso crio um IP Virtual e depois crio uma politica para liberação da porta e do IP do servidor.

Só que nao esta aparecendo no momento de criar a politica, o IP Virtual nao aparece. Assim nao consigo criar a politica para liberar as portas de servidores para acesso externo.

[ede_pfau]

[I think Jonathan posts that he wants to use a VIP to expose his terminal server, but in v5.4 to which he upgraded he cannot choose the VIP as destination in the policy. He is using dual WAN ports with the virtual WAN link.]

Could you please post the policy and the VIP definition (from CLI, text only)? 'config firewall policy' and 'config firewall vip'.

[JonathanFurtado]

Exactly ede_pfau . In previous versions created the VIP and add already in politics . In this version create the VIP , when I add only shows addresses. So a moment already shipping