IP Sec Tunnel Interface is UP, but i can't do a ping to remote pc
Hi, I have 2 fortigates a 60E and a 20C I have established the IPSec tunnels for site-to-site vpn. The tunnel in both fortigates appears to me to be up, but I cannot ping between the lan networks. I have set the static route and added the access policies. I don't know what else to do. And if I check the IPSec monitor, I see that there is incoming and outgoing traffic.
Hi ShivSagar, thank you. Yeah, in the firewall policy i logging all allowed traffic. With the packet debug flow i see the packet that i send in both fortigates coming in the VPN interface. But still it doesn't ping, what I notice in both fortigates on the IPSec monitor is that there is only Outgoing Data and no Incoming Data.
I don't know what else to do, and I eliminated the VPNs and recreated them, I did a flush and reset the tunnel and it remains the same :(
Hi Bob, thanks for your time, I have configured the static route with the distance in 1 in both fortigates. But I still don't ping. If you have time and even if there is a cost involved, could you help me to solve this problem please
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.