IP SEC INTERFACE UP. PING AT FORTIGATE DOES'N WORK!

hungran91 · ‎03-28-2016

I have 2 FG 60D (local: 192.168.20.254) n 200A (192.168.5.254) using VPN interface mode.

IPsec mornitor is up. I can use RDP, and Local can ping betwen together. I can ping from FG 200A to 192.168.20.254 ok. But i cannot ping from FG 60 to 192.168.5.254 or any device remote site.

PLS help!

ede_pfau · ‎03-28-2016

Do you have policies for both directions?

Ede Kernel panic: Aiee, killing interrupt handler!

hungran91 · ‎03-28-2016

Yes. On FG 60D i have to use exe ping-options source 192.168.20.254 first then i can ping to 192.168.5.254.

hungran91 · ‎03-28-2016

hungran91 wrote:
Yes. On FG 60D i have to use exe ping-options source 192.168.20.254 first then i can ping to 192.168.5.254.

But when i logout/login again, it doesnt work. The traffic have only one subnet (192.168.5.0/24) can through over VPN. But on FG 200A i have some static routes. And on FG 60D i was added static routes with device VPN P1 from FG 200A (distance lower than default route).