Hello
Would anyone know the commands to check file system for Indicators of Compromise related to the above CVE? I understand that this was affected only between 7.2.0 - 7.2.2, but we were running that version before and we are now on 7.2.8
I did get these commands from TAC, but it seems almost impossible to sift through the data:
diag debug crashlog read
fnsysctl ls /var/log/log/root/
fnsysctl ls -l /data/lib
get sys performance status
get system status
exec tac report
Appreciate the assistance in advance.
Hello,
You may use link below as guide:
So for an HA pair of FortiGate's, would I need to check the standby firewall as well?
# diagnose debug crashlog read
as well as the libraries on each Primary/Standby device?
# fnsysctl ls -l /data/lib
/data/lib/libips.bak
/data/lib/libgif.so
/data/lib/libiptcp.so
/data/lib/libipudp.so
/data/lib/libjepg.so
# fnsysctl ls -la /var
/var/.sslvpnconfigbk
# fnsysctl ls -l /data/etc
/data/etc/wxd.conf
# fnsysctl ls -l /
/flash
Yes, please check each unit.
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1737 | |
1107 | |
752 | |
447 | |
240 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.