IKEv2 with iOS 9

[JÃ_rg]

Hi.

We have a problem on a Fortigate 100D with 5.2.4.

We trying to set up a IPSec VPN with IKEv2 to connect our iPhone/iPads with iOS 9.x to use the new iOS 9 Feature "per App VPN". To do that we need to use the IKEv2.

The fortigate config:

config vpn ipsec phase1-interface edit "IKEv2" set type dynamic set interface "wan1" set ike-version 2

set peerid "1"

set mode-cfg enable

set ipv4-dns-server1 10.1.4.23 set ipv4-start-ip 10.3.0.76 set ipv4-end-ip 10.3.0.100 set ipv4-netmask 255.255.255.0 set psksecret ENC ........ next end

On the iPhone is the field "Remote ID" is marked as required? What to enter here? The fortigate peerid? When I do that, I get a "Phase 1 failure" in the fortigate log. Could someone please give me a hint?

iPhone IKEv2 Settings:

[krissilon]

Hi,

Did you manage to get this resolved ?  I have the same problem.

Tks !

[dchina]

the same problem is for me   with fortios 5.4.4;

I found a url

Technical Note: Configure IKEv2 IPsec VPN with Windows Phone 8.1, Windows 8.1

http://kb.fortinet.com/kb/documentLink.do?externalID=FD38854

but it is  not solved this problem.