I always lose my internet connection each time I connect my #FortiClient IPsec VPN and this is affecting my remote access to the PC. Please help with a solution. I wasn't like this before now.
I use version 7.2.4.0972
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Check your routing table or use traceroute 1.1.1.1 to see if it is going through the tunnel. If so then you may need to enable split tunnel.
Do you have any firewall rules allowing traffic from your VPN to your network ? Is it NAT'ed ? If not, you would need the reverse rule to allow traffic back into your vpn.
Do you have split tunnel enabled? If so, what are you using for accessible networks?
If you don't have split tunnel enabled, do you have a policy allowing the VPN interface to the internet and to other resources within the network?
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1714 | |
1093 | |
752 | |
447 | |
232 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.