I always lose my internet connection each time I connect my #FortiClient IPsec VPN and this is affecting my remote access to the PC. Please help with a solution. I wasn't like this before now.
I use version 7.2.4.0972
Check your routing table or use traceroute 1.1.1.1 to see if it is going through the tunnel. If so then you may need to enable split tunnel.
Do you have any firewall rules allowing traffic from your VPN to your network ? Is it NAT'ed ? If not, you would need the reverse rule to allow traffic back into your vpn.
Do you have split tunnel enabled? If so, what are you using for accessible networks?
If you don't have split tunnel enabled, do you have a policy allowing the VPN interface to the internet and to other resources within the network?
User | Count |
---|---|
2052 | |
1170 | |
770 | |
448 | |
341 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2025 Fortinet, Inc. All Rights Reserved.