I have some questions about fan and psu information in FG-1800f and 401f

[thekoreanguy]

I don't have these devices, but I want to know what the information on these devices looks like in the CLI.

Thank you for your interest and service.

[ebilcari]

The output will look similar to this (1500D):

Fan 1 alarm=0 value=3800 threshold_status=0
type=4/1
upper_non_recoverable=11000
upper_critical=10500
upper_non_critical=9900
lower_non_critical=1500
lower_critical=1000
lower_non_recoverable=500
---------------------------------------------------------
PS1 Temp alarm=0 value=28 threshold_status=0
type=1/1
upper_non_recoverable=70
upper_critical=65
upper_non_critical=60

PS1 Fan 1 alarm=0 value=12544 threshold_status=0
type=4/1
upper_non_recoverable=21120
upper_critical=20096
upper_non_critical=19072
lower_non_critical=384
lower_critical=256
lower_non_recoverable=128

PS1 VOUT_12V alarm=0 value=11.969 threshold_status=0
type=2/1
upper_non_recoverable=15.245
upper_critical=14.867
upper_non_critical=14.048
lower_non_critical=10.016
lower_critical=9.512
lower_non_recoverable=9.197

There is also an old article as a reference: https://community.fortinet.com/t5/FortiGate/Technical-Note-How-to-check-temperature-values-on-FortiG...

[thekoreanguy]

Thank you very much for the help.

[AEK]

You are probably looking for "diag hardware deviceinfo psu"

[esalija]

Hi @thekoreanguy 

Here you can find the FG1800F datasheet - chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-1800f-series.pdf

and for FGT400F - chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://www.fortinet.com/content/dam/fortinet/assets/data-sheets/fortigate-400f-series.pdf

Best regards,

Erlin

If you have found a solution, please like and accept it to make it easily accessible to others.

[thekoreanguy]

Thank you very much for the help !!!