I recently installed a forti image V7.0.11 on pnetLab. I set up my lab which contains the forti, the cloud and a computer. I configured everything and I was able to go out on the internet. After some time the ping to the internet no longer works from the pc but the forti pings the internet well. At first I said to myself I may have changed something without realizing it. So I set up another lab, it was the same thing. I set up a third lab and I set the timer to about 1 hour the ping to the internet stopped. Every 1 hour I have to set up a new lab. I need your help.
Solved! Go to Solution.
Nominating a forum post submits a request to create a new Knowledge Article based on the forum post topic. Please ensure your nomination includes a solution within the reply.
Hello, I finally found a solution. I changed the version I was using v7.0.11 to version V7.0.0.
I tried version V7.0.11 on another machine, it was the same thing.
I think it was a version problem.
Thanks everyone for your help.
This seems like a trial license getting expired in the emulator or FGT. Try to proper license the FGT VM by requesting a Permanent trial mode license.
Hello,
Thanks for your feedback, but I don't think it's a licensing issue. All licenses are green.
Hi
Did you try on another hypervisor?
Hi,
no yet.
I will try tha and and get back to you.
yod
Hello @AEK,
I tried another hypervisor. I have the same problem. After exactly one hour the ping are stopped.
HI @yodiallo
Check with the debug logs why ping getting failed.
And please check is the CPU and memory is normal on the device.
And check the crash logs with the below command
#diagnose debug crashlog read.
Regards,
Hi,
Thx for your feedback. I will try that.
yod.
Hello @VinayHM,
I don't have read, so I tried with history
# diagnose debug crashlog history
Crash log interval is 3600 seconds
Max crash log line number: 16384
#diagnose debug crashlo
get Get crashlog.
clear Clear crash log.
interval Change crash log interval in seconds.
history Show process crash history.
hi @yodiallo
when the internet is failing, Please run the below-mentioned command to see what is happening with traffic.
Trace logs:-
> diagnose debug reset
> diagnose debug flow filter
> diagnose debug flow filter saddr x.x.x.x -- source address
> diagnose debug flow filter daddr y.y.y.y -- destination address
> diagnose debug flow show function-name enable
> diagnose debug flow trace start 100
> diagnose debug enable
Please collect the sniffer logs for non-working communication.
ping 8.8.8.8 from your PC and collect the logs
> diag sniffer packet any "host x.x.x.x and host y.y.y.y" 4 0 a
Select Forum Responses to become Knowledge Articles!
Select the “Nominate to Knowledge Base” button to recommend a forum post to become a knowledge article.
User | Count |
---|---|
1640 | |
1069 | |
751 | |
443 | |
210 |
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.