Dear All,
I'm using the FortiGate 100D and I am using 802.3ad Aggregate interface. One another device is plugged into another port of the FortiGate (port 3) (IP static is 10.199.139.200). I have created one policy for I can go to that port 3 but I can't ping to the IP 10.199.139.200 when I'm in the 802.3ad Aggregate interface network. I can ping that IP from FortiGate. I don't why?
Solved! Go to Solution.
Created on 02-26-2024 10:46 PM Edited on 02-26-2024 10:46 PM
yes, my IP is 10.199.129.149/24 on aggregate interfaces.
whats the IP on aggregate interface? are you able to ping that IP?
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
Dear Mr.,
I'm using Meraki Cisco and there are many routings interface and DHCP on every interface. My FortiGate is using aggregate interface, I can ping my IP 10.199.129.149 and reverse. The IP address 10.199.139.200 is static IP of one devive and pluged into port3 on fortigate. My issue, I can ping to 10.199.139.200 form 10.199.129.149.
The problem is the ping packets to 10.199.139.200 is not reaching Fortigate. From PC can you do a tracert 10.199.139.200 and check if its hitting 10.199.143.254 ?
Suraj
- Have you found a solution? Then give your helper a "Kudos" and mark the solution.
Dear,
Thank' a lot, maybe I will research again.
The Fortinet Security Fabric brings together the concepts of convergence and consolidation to provide comprehensive cybersecurity protection for all users, devices, and applications and across all network edges.
Copyright 2024 Fortinet, Inc. All Rights Reserved.