I can't connect to IP on the interface.

[minhthanh114]

Dear All,

I'm using the FortiGate 100D and I am using 802.3ad Aggregate interface. One another device is plugged into another port of the FortiGate (port 3) (IP static is 10.199.139.200). I have created one policy for I can go to that port 3 but I can't ping to the IP 10.199.139.200 when I'm in the 802.3ad Aggregate interface network. I can ping that IP from FortiGate. I don't why? 

[minhthanh114]

yes, my IP is 10.199.129.149/24 on aggregate interfaces.

[srajeswaran]

whats the IP on aggregate interface? are you able to ping that IP?

[minhthanh114]

Dear Mr.,

I'm using Meraki Cisco and there are many routings interface and DHCP on every interface. My FortiGate is using aggregate interface, I can ping my IP 10.199.129.149 and reverse. The IP address 10.199.139.200 is static IP of one devive and pluged into port3 on fortigate. My issue, I can ping to 10.199.139.200 form 10.199.129.149.

[srajeswaran]

The problem is the ping packets to 10.199.139.200 is not reaching Fortigate. From PC can you do a tracert 10.199.139.200 and check if its hitting 10.199.143.254 ?

[minhthanh114 · Accepted solution]

Dear, 

Thank' a lot, maybe I will research again.